Audio Mixer, Amplifiers, Mic, Power Mixers for clearance in East Coast Road, East Singapore for sale

BULK PURCHASE- We have further reduced the pricing for bulk clearance. Please visit WWW.AUDIOVIDEOEQUIPMENT.BLOGSPOT.SG
$55
$55 per pc or $270 for 6pcs
6 Panasonic professional range of microphone Ramsa WM-D150sw available
The reason we are clearing these was due to excess from projects previously where we install for large Audiitorium and concert halls
This is professional microphone that are use for concert and live performances and can also be used as instrument pickup mic and some love to use it for their home entertainment for karaoke,
The microphone come packed in original box with mic holder, mic bag and instruction manual
Vocal
Tightly tuned low range gives presence to vocals
Unique structure prevents the microphone from rolling and keeps handling noise to a minimum
Locking ON/OFF switch
SPECIFICATIONS
Dynamic Type
Front sensitivity -56dB
Frequency 50Hz- 15kHz
Directivity Unidirectional
Output Impedance 250ohm balanced (1kHz)
Wind Noise 46dB SPL
Induced Noise 5dB SPL
XLR connector type
Microphone Holder mouning screws PF 1/2 w3/8
Weight 340g
$198
$198 per pc or $600 for 4 pcs
4 units of Panasonic/Ramsa WR-X04 4 channel audio mixer, made in japan(Brand New in Original Box) available
New in Box, MADE IN JAPAN Ramsa WR-X04,8Ch Pro Audio Mixer
MADE IN JAPAN
Brand New in box,Ramsa WR-X04 Professional Audio Mixer
4 Mono input & 2 stereo line input channel audio mixer,
Made in japan
(Brand New in Original Box)
The unit is rack mounted and suitable for home use, small café, for permanent installation in
lecture theatres or training room as well
$250
1 unit of Ramsa WR-X11 12 Channel Mixer (6 mono, 6 line input) made in japan(Brand New in Original Box) Description
Ramsa Professional Audio PA Mixer, MADE IN JAPAN
1 units of Ramsa WR-X11 available
6 Mono input(Vocal/Speech) & 6 stereo line input channel audio mixer,
1 Main Out, 1 Mono Out 1 Pre out & 1 Post out suitable for a centralised
mixer linking to multiple location with individual volume control
Made in japan
(Brand New in Original Box)
The unit is rack mounted one suitable to use for permanent installation in
lecture theatres or training room, conference rooms or auditorium
$500
$500 per pc or $800 for 2 pcs
2 units of Ramsa WR-S4412A/G 12 Channel Mixer(Brand New in Original Box) available
Description: # of Channels: 12 - # of Buses: 4 - # of Monitor Sends: 2
12 channels with preamps
Every input Channel can be used for mic XLR or line TRS via toggling A/B switch
4 buss routing for effects and parallel processing
•Individual left and right master faders
•3 band semi-parametric EQ on each channel
•Aux sends on each channel with pre/post switch
•Channel mutes
•Switchable pre fader listen on each channel
•Talkback mic insert
•Switchable mono summing
•Direct outs on each channel, great for bussing to A/D converters
•Punchy, warm, saturated preamps, great for redlining instruments
Phantom power for each input channel
Suitable for concert, café, live performance, permanent installation I Auditorium
$450
$450 per pc or $1050 for 3pcs
3 units Ramsa WR-21N 120w x 3 output power mixer with 6 inputs (Brand New in Original Box)
Made in japan
(Brand New in Original Box)
Ramsa Professional Audio Mixer c/w Built in Amplifier of 120w x 3.
6 Mono input(mic/inst./line(selectable) + 1 channel input music/audio.)
3 powered output of 120W each
The unit is suitable to use for mobile or permanent installation in lecture
theatres or training room, conference rooms or auditorium
$200 (USED)
1 unit of Panasonic/Ramsa WP-1200 Amplifier (Used in Good working condition) available, Made in Japan
WP-1200 CE approved products use a high technolgy,dual-voltage supply in a"Class H" circuit configuration. Unlike conventional amplifiers, which use only a single output-stage
To protect the amplifier against turn-on/turn-off transients, Panasonic engineers added muting system. To protect the loudspeaker load against DC voltage generated at the output terminals, they included an intelligent, high-speed "crowbar" circuit
WP-1200
Rated Power Output: 120W+120W/8Ω, 20Hz to 20kHz Less than 0.3% THD
200W+200W/4Ω, 40Hz to 20kHz Less than 0.3% THD
Bridget Output: 400W/8Ω 20Hz to 20kHz
Frequency Response: 20Hz to 20kHz+0dB, -0.5dB at 4Ω 1W output
THD 4Ω Load: Less than 0.3%, 40Hz to 20kHz
Less than 0.1%, 1kHz
IM Distortion:
(SMPTE,CCIF,DIM 100) Less than 0.3%
Channel Separation: Greater than 60dB at 20kHz
Voltage Gain: 27.2dB at 1kHz
Input Sensitivity: +4dBu at Rated output/4Ω
Input Impedance: 40kΩ
Input CMRR; Greater than 40dB at 1kHz
Damping Factor: Greater than 100 at 1kHz 8Ω Load
SN Ratio (DIN): Greater than 100dB below 8Ω Rated
Source Voltage/Frequency: 220V/240V AC, 50Hz
Front Panel Facilities
Power Switch: Push Type Switch
Power Indicator: LED Red
Peak Indicator: LED Red × 2
Protection Indicator: LED Amber × 2
Rear Panel Facilities
Input Sensitivity Adjuster: Rotary Potentiometer
Input Connectors: Female XLR Half Lock Type
Phone TRS 1/4"
Speaker Output Terminals: 5-Way Binding Posts
Stereo/Bridged Mono Selector: Rececced Slide Switch
Others
Dimensions: 480mm (W) × 88mm (H) × 393mm (D) (excluding feet)
Weight: 11.8kg